Author Topic: WinLIRC allows you to transmit and receive standard IR remote control signals  (Read 3657 times)

0 Members and 1 Guest are viewing this topic.

Software Santa

  • Administrator
  • *****
  • Join Date: Dec 2006
  • Posts: 5238
WinLIRC allows you to transmit and receive standard infrared remote control signals.

Quote
About WinLIRC

WinLIRC allows you to transmit and receive standard infrared remote control signals. This allows you to control your computer using almost any standard infrared remote control. It also allows your computer to control other equipment which uses these signals (stereo equipment).

WinLIRC is the Windows equivalent of LIRC, the Linux Infrared Remote Control program. WinLIRC (through version 0.6) was originally written by Jim Paris. Later releases are written and maintained on sourceforge.
Hardware requirements

WinLIRC requires a very simple IR detector connected to a serial port. Any serial hardware that works with the original LIRC will also work with WinLIRC. Note that the parallel port hardware, IRDA ports, and Irman are not yet supported by WinLIRC. WinLIRC also supports a variation on the serial port receiver, that has it's pins attached to the irDA header pins on the motherboard. The transmitter is simply an infrared LED and a current limiting resistor. You should easily be able to buy all the parts for the transmitter and receiver for less that $15.

A 166 MHz Pentium should work fine (slower Pentiums may work too).

http://winlirc.sourceforge.net/

 

Software Santa first opened on January 1st, 2007
Now celebrating 16 Years of being a Digital Santa Claus!
Software Santa's Speedy Site is Proudly Hosted by A2 Hosting.

Welcome Visitor:





@MEMBER OF PROJECT HONEY POT
Spam Harvester Protection Network
provided by Unspam



Software Santa Welcome Page

The Software Santa Privacy Policy