Author Topic: EAGLE Light Edition is for schematic capture and printed circuit board design  (Read 3718 times)

0 Members and 1 Guest are viewing this topic.

Software Santa

  • Administrator
  • *****
  • Posts: 4288
EAGLE Light Edition is for schematic capture and printed circuit board design.

Limited Version for Non Commercial use ONLY! Works on Linux / Windows / Mac OS X


The EAGLE Light Edition can be used for free!

How do I get it?

Follow these steps to install the free EAGLE Light Edition on your system:
  • Go to the Download area and get the file that contains the EAGLE program installation data for your operating system (Linux, Windows or Mac).
  • Install the file you have downloaded onto your system.


The following limitations apply to the EAGLE Light Edition in general:
  • The useable board area is limited to 100 x 80 mm (4 x 3.2 inches).
  • Only two signal layers can be used (Top and Bottom).
  • The schematic editor can only create one sheet.
Apart from these three limitations the EAGLE Light Edition can do anything the Professional Edition can do. You can even load, view and print drawings that exceed these limits!

The Freeware version of EAGLE Light adds these limitations:
  • Support is only available via email or through our forum (no fax or phone support).
  • Use is limited to non-profit applications or evaluation purposes.

The definition of non-profit is fairly simple and straightforward:
  • If you earn (or save) money by using the Freeware version of EAGLE Light, you have to register it.
This allows anybody who wishes to use EAGLE Light for their private hobby projects to do so. Also students can use this version for any educational projects. It is even ok to use this version in a commercial environment, as long as you just want to evaluate the program. As soon as you start using it for commercial projects, you will have to register it. As an exception to this, board manufacturers may use the Freeware Light Edition to generate production data (e.g. Gerber files) from board files they have received from EAGLE users.

Is it really useful?68HC12 board, which does not exceed the capabilities of EAGLE Light (in fact you can do even bigger boards than the one shown there).

How can I register/upgrade?

If your application exceeds the non-profit domain, or if you prefer to have access to full support via phone or fax, you can register your program copy and receive your own, personalized license file. Any files you have created with the Freeware version of EAGLE Light can be used with any registered version of EAGLE Light, Standard or Professional. So if your project exceeds the limits of EAGLE Light, you can always go to a higher level (and you only have to pay the difference between what you have and what you are upgrading to).

If you need more power than the Freeware version provides, maybe our EAGLE Hobbyist can be of interest to you.

Redistributing EAGLE
  • DOC file).
  • Fill out the form and send it to us by fax (+49-8635-698940) or email (
  • Once we have approved your application, we will send you a letterDOC file).
  • Read that letter carefully and make sure you fully understand and agree with it.
  • Sign the letter and mail it back to us (postal mail is required, no fax or email).
« Last Edit: November 05, 2014, 05:55:20 PM by Software Santa »


Welcome Visitor: